Graphtec Cutter Calibrate plot points for output
The plotpoints x and y need to be modified in order to output the correct size.
--------------------------------------------------------------------------------------
Draw a 1"x1" inch box.
Press Ctrl + Shift + P in Stone Cut Pro and the Driver Editor will open.
You can find it as "%plotpointx%" and "%plotpointy%", under the "Name" column, seen on the right hand side of the driver editor. Change the values to 0.1 and click File > Save (CTRL + S command to save) and test it again.
Send the 1"x1" box to the cutter and measure it. Your cutter is now dialed in.
--------------------------------------------------------------------------------------
Please let us know if you need further assistance.